← View product directory / Record detail
Supply Product / VERIFIED LISTING

Basler ace 2 R a2A1920-51gmBAS 2.3 MP GigE Area Scan Camera

Listed by Basler AG

Basler ace 2 R a2A1920-51gmBAS 2.3 MP GigE Area Scan Camera
Listing typeSupply Product
Record ID950000275
StatusPublished

Product description

The Basler ace 2 R a2A1920-51gmBAS is a monochrome GigE area-scan camera using the Sony IMX392 global-shutter CMOS sensor. The manufacturer lists 1920 × 1200 default resolution, 51 fps, C-mount, and PoE or 12–24 VDC power. Basler documentation carries a not-yet-in-series-production notice, while the English shop listing shows the product as ready for dispatch; confirm current lifecycle and regional availability with Basler. The image is an official representative ace 2 GigE camera photo, not a model-specific technical drawing.

Specifications

Product modelBasler ace 2 R a2A1920-51gmBAS; order number 107822
Vision typeMonochrome area-scan industrial camera; ace 2 R GigE
Image sensorSony IMX392LQR-C progressive-scan CMOS; global shutter
Resolution1920 × 1200 pixels default; 1936 × 1216 full resolution; 2.3 MP
Frame rate51 fps at default settings
Image data interfaceGigE; 100 Mbit/s Fast Ethernet and 1000 Mbit/s Gigabit Ethernet; GVSP
Synchronization modesHardware trigger, software trigger, free-run
Lens mountC-mount
Protection ratingIP30
Operating temperature−10 °C to +60 °C
Dimensions48.9 × 29 × 29 mm without lens mount/connectors; 62.2 × 29 × 29 mm with mount/connectors
Weight<100 g
Pixel size3.45 × 3.45 μm
Dynamic range71.7 dB typical
Conformity / certificationsCE (incl. RoHS), EAC, FCC, GenICam, GigE Vision 2.0, IP30, KC, RoHS, UKCA, UL
SoftwareBasler pylon Software Suite version 6.0 or higher; Windows, Linux x86/ARM, macOS, Android

Technical extensions

Pixel pitch 3.45 × 3.45 μm; 1/2.3-inch sensor with 7.81 mm diagonal; visible spectrum; 8/10/12-bit pixel depth; GigE Vision 2.0 and GenICam conformity; image stream via GVSP; M8 6-pin power/I/O connector; one digital input and two GPIO; typical power 3 W; housing operating temperature −10–60 °C; pylon Software Suite 6.0+ for Windows, Linux x86/ARM, macOS, and Android. Product lifecycle caveat is stated above.

Lifecycle: Basler's documentation says the model is not yet in series production; its shop page shows ready-for-dispatch status. Verify present release and regional availability with Basler. Image note: the photo is a real, manufacturer-hosted representative ace 2 GigE mono camera image, not a model-specific drawing. Official English shop page · Official product documentation.

Basler ace 2 R a2A1920-51gmBAS 2.3 MP GigE Area Scan Camera representative Basler ace 2 GigE mono camera

Specifications

Vision typeMonochrome area-scan industrial camera; ace 2 R GigE
Image sensorSony IMX392LQR-C progressive-scan CMOS; global shutter
Resolution1920 × 1200 pixels default; 1936 × 1216 full resolution; 2.3 MP
Frame rate51 fps at default settings
Product modelBasler ace 2 R a2A1920-51gmBAS; order number 107822
Data interfaceGigE; 100 Mbit/s Fast Ethernet and 1000 Mbit/s Gigabit Ethernet; GVSP
Trigger modeHardware trigger, software trigger, free-run
Lens mountC-mount
Ingress protectionIP30
Operating temperature−10 °C to +60 °C
Dimensions48.9 × 29 × 29 mm without lens mount/connectors; 62.2 × 29 × 29 mm with mount/connectors
Weight<100 g
CertificationCE (incl. RoHS), EAC, FCC, GenICam, GigE Vision 2.0, IP30, KC, RoHS, UKCA, UL
Pixel size3.45 × 3.45 μm
Dynamic range71.7 dB typical
SDKBasler pylon Software Suite version 6.0 or higher; Windows, Linux x86/ARM, macOS, Android