Listing typeSupply Product
Record ID950000255
StatusPublished
Overview
SCHUNK EGU 70-EI-M-B electric parallel gripper with EtherNet/IP and permanent-magnet gripping-force maintenance.
Product description
SCHUNK EGU 70-EI-M-B electric parallel gripper with EtherNet/IP and permanent-magnet gripping-force maintenance.
Standard specifications
| Product model | EGU 70-EI-M-B |
|---|---|
| Gripper type | parallel |
| Rated payload | Manufacturer does not state a workpiece payload rating for this variant; see gripping-force specifications |
| Grip force | 650 N minimum; 1950 N maximum total across both jaws |
| Stroke / opening | 70 mm per jaw |
| Finger length | 160 mm maximum permitted |
| Number of fingers | 2 |
| Repeatability | Gripping repeat accuracy: 0.03 mm |
| Supply voltage | 24 V |
| Communication protocol | EtherNet/IP |
| Ingress protection | Electronics: IP67; guide/base jaws: IP40 |
| Dimensions | 180 × 110 × 122 mm (X × Y × Z) |
| Weight | 4.52 kg |
| Operating temperature | 5–55 °C ambient |
| Technical extension parameters | EGU size 70 electric parallel gripper; variant includes gripping-force maintenance with permanent-magnet brake (M); minimum gripping-force maintenance 80%, maximum 100%; maximum permitted finger mass 1.4 kg per finger; positioning repeat accuracy 0.05 mm unidirectional and 0.3 mm bidirectional; opening/closing time 1.0 s; maximum positioning speed 70 mm/s and acceleration 600 mm/s²; current consumption: BasicGrip nominal/max 0.84/2.16 A; StrongGrip nominal/max 1.56/2.76 A; logic nominal/max 0.16/0.20 A; maximum static moments per jaw Mx 65 Nm, My 105 Nm, Mz 80 Nm; maximum axial force Fz 1600 N; cleanroom class ISO 14644-1 Class 5:2015; warranty 24 months or 5 million cycles BasicGrip / 3 million StrongGrip; anodized aluminum-alloy housing, corrosion-protected steel base jaws. Manufacturer defines gripping force as the arithmetic sum across both jaws. Manufacturer does not publish a workpiece-payload rating for this variant. |
Image note: manufacturer identifies this product-page image as an illustration similar to the selected variant.
Official English product source: https://schunk.com/de/en/gripping-systems/parallel-gripper/egu/egu-70-ei-m-b/p/000000000001491575
Specifications
Gripper typeparallel
Rated payloadManufacturer does not state a workpiece payload rating for this variant; see gripping-force specifications
Grip force650 N minimum; 1950 N maximum total across both jaws
Stroke / opening70 mm per jaw
Finger length160 mm maximum permitted
Product modelEGU 70-EI-M-B
Number of fingers2
RepeatabilityGripping repeat accuracy: 0.03 mm
Supply voltage24 V
Communication protocolEtherNet/IP
Ingress protectionElectronics: IP67; guide/base jaws: IP40
Dimensions180 × 110 × 122 mm (X × Y × Z)
Weight4.52 kg
Operating temperature5–55 °C ambient
Technical extension parametersEGU size 70 electric parallel gripper; variant includes gripping-force maintenance with permanent-magnet brake (M); minimum gripping-force maintenance 80%, maximum 100%; maximum permitted finger mass 1.4 kg per finger; positioning repeat accuracy 0.05 mm unidirectional and 0.3 mm bidirectional; opening/closing time 1.0 s; maximum positioning speed 70 mm/s and acceleration 600 mm/s²; current consumption: BasicGrip nominal/max 0.84/2.16 A; StrongGrip nominal/max 1.56/2.76 A; logic nominal/max 0.16/0.20 A; maximum static moments per jaw Mx 65 Nm, My 105 Nm, Mz 80 Nm; maximum axial force Fz 1600 N; cleanroom class ISO 14644-1 Class 5:2015; warranty 24 months or 5 million cycles BasicGrip / 3 million StrongGrip; anodized aluminum-alloy housing, corrosion-protected steel base jaws. Manufacturer defines gripping force as the arithmetic sum across both jaws. Manufacturer does not publish a workpiece-payload rating for this variant.