Listing typeSupply Product
Record ID950000254
StatusPublished
Overview
SCHUNK EGU 70-IL-N-B electric parallel gripper with 70 mm stroke per jaw, IO-Link interface and IP67 electronics protection.
Product description
SCHUNK EGU 70-IL-N-B electric parallel gripper with 70 mm stroke per jaw, IO-Link interface and IP67 electronics protection.
Standard specifications
| Product model | EGU 70-IL-N-B |
|---|---|
| Gripper type | parallel |
| Rated payload | Manufacturer does not state a workpiece payload rating for this variant; see gripping-force specifications |
| Grip force | 650 N minimum; 1300 N maximum total across both jaws |
| Stroke / opening | 70 mm per jaw |
| Finger length | 160 mm maximum permitted |
| Number of fingers | 2 |
| Repeatability | Gripping repeat accuracy: 0.03 mm |
| Supply voltage | 24 V |
| Communication protocol | IO-Link |
| Ingress protection | Electronics: IP67; guide/base jaws: IP40 |
| Dimensions | 180 × 110 × 122 mm (X × Y × Z) |
| Weight | 4.4 kg |
| Operating temperature | 5–55 °C ambient |
| Technical extension parameters | EGU size 70 electric gripper, variant EGU 70-IL-N-B; maximum permitted finger mass 1.4 kg per finger; positioning repeat accuracy 0.05 mm unidirectional and 0.3 mm bidirectional; closing/opening time 1.0 s; maximum positioning speed 70 mm/s and acceleration 600 mm/s²; nominal current consumption: BasicGrip 0.78 A, logic 0.16 A; maximum current consumption: BasicGrip 1.92 A, logic 0.20 A; maximum static moments per base jaw Mx 65 Nm, My 105 Nm, Mz 80 Nm; maximum axial force Fz 1600 N; cleanroom class ISO 14644-1 Class 5:2015; 24 months or 5 million cycles in BasicGrip / 3 million in StrongGrip; aluminum-alloy anodized housing; corrosion-protected steel base jaws. Manufacturer defines gripping force as arithmetic sum of forces on both jaws. The manufacturer labels the product-page illustration as “Illustration similar”; photo shows a genuine EGU gripper but is illustrative, not guaranteed to depict every variant detail. |
Image note: SCHUNK identifies this as an illustration similar to the selected variant.
Official English product source: https://schunk.com/us/en/gripping-systems/parallel-gripper/egu/egu-70-il-n-b/p/000000000001491568
Specifications
Gripper typeparallel
Rated payloadManufacturer does not state a workpiece payload rating for this variant; see gripping-force specifications
Grip force650 N minimum; 1300 N maximum total across both jaws
Stroke / opening70 mm per jaw
Finger length160 mm maximum permitted
Product modelEGU 70-IL-N-B
Number of fingers2
RepeatabilityGripping repeat accuracy: 0.03 mm
Supply voltage24 V
Communication protocolIO-Link
Ingress protectionElectronics: IP67; guide/base jaws: IP40
Dimensions180 × 110 × 122 mm (X × Y × Z)
Weight4.4 kg
Operating temperature5–55 °C ambient
Technical extension parametersEGU size 70 electric gripper, variant EGU 70-IL-N-B; maximum permitted finger mass 1.4 kg per finger; positioning repeat accuracy 0.05 mm unidirectional and 0.3 mm bidirectional; closing/opening time 1.0 s; maximum positioning speed 70 mm/s and acceleration 600 mm/s²; nominal current consumption: BasicGrip 0.78 A, logic 0.16 A; maximum current consumption: BasicGrip 1.92 A, logic 0.20 A; maximum static moments per base jaw Mx 65 Nm, My 105 Nm, Mz 80 Nm; maximum axial force Fz 1600 N; cleanroom class ISO 14644-1 Class 5:2015; 24 months or 5 million cycles in BasicGrip / 3 million in StrongGrip; aluminum-alloy anodized housing; corrosion-protected steel base jaws. Manufacturer defines gripping force as arithmetic sum of forces on both jaws. The manufacturer labels the product-page illustration as “Illustration similar”; photo shows a genuine EGU gripper but is illustrative, not guaranteed to depict every variant detail.